First Time Setup—Continued
TV Format Setup
(not North American models)
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
1
Press the [Receiver] button, fol-
lowed by the [Setup] button.
Receiver
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select "6. Miscella-
neous", and then press [Enter].
The "Miscellaneous" menu appears.
Enter
Enter
3
Use the Up and Down [ ]/[ ] but-
tons to select "2. OSD Setup",
and then press [Enter].
The "OSD Setup" menu appears.
Enter
Enter
Note:
The "TV Format" (*) setting is not
available on the North American mod-
els.
58
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. Trigger A Setup
4. Trigger B Setup
5. Trigger C Setup
MOVE
ENTER
RETURN
EXIT
ENTER
RETURN
SETUP
6–2. OSD Setup
Immediate Display
On
Monitor Type
16 : 9
Display Position
Bottom
TV Format
Auto
Language
English
MOVE
VALUE
RETURN
RETURN
SETUP
4
Enter
Enter
5
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
EXIT
Use the Up and Down [ ]/[ ] but-
tons to select "TV Format", and
then use the Left and Right
[ ]/[ ] buttons to select:
Auto: Select this to have the AV
receiver automatically detect
the TV system from the video
input signals.
NTSC: Select if the TV system in
your area is NTSC.
PAL: Select if the TV system in
your area is PAL.
Press the [Setup] button.
Setup closes.