Integra DTR-50.1 Instruction Manual page 48

First Time Setup—Continued
Component Video Input Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD/BD player to COMPONENT VIDEO IN 2,
you should assign it to the DVD/BD input selector.
Input selector
DVD/BD
VCR/DVR
CBL/SAT
Game
AUX
TV/Tape
Tuner
CD
Phono
Port
If you've connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are
upconverted* and output by the COMPONENT VIDEO
*1
MONITOR OUT . You can set this for each input
selector by selecting the "- - - - -" option.
Composite video, S-Video
Composite video, S-Video
*1 Only when "Monitor Out" setting is set to "Analog".
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select "1. Input/Output
Assign", and then press [Enter].
The "Input/Output Assign" menu
appears.
48
Default assignment
IN1
- - - - -
IN2
IN3
- - - - -
- - - - -
- - - - - (Fixed)
- - - - -
- - - - -
- - - - -
Component video
IN
OUT
Component video
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
3
Use the Up and Down [ ]/[ ] but-
tons to select "3. Component
Video Input", and then press
[Enter].
The "Component Video Input" menu
appears.
1–3. Component Video Input
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
4
Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and then use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
IN2: Select if the video component
IN3: Select if the video component
- - - - -: Select if you are using the
5 Press the [Setup] button.
The setup menu closes.
Notes:
• For composite video and S-Video upconversion for
the COMPONENT VIDEO MONITOR OUT, the
"Monitor Out" setting must be set to "Analog" (see
page 45), and the "Component Video Input" setting
must be set to "- - - - -". See page 26 for more
information on video signal flow and upconversion.
• If not connected to HDMI output, the "Monitor Out"
setting will be automatically switched to "Analog"
(see page 27).
• If you connect an input component (such as UP-A1
Dock that seated iPod) to the UNIVERSAL PORT jack,
you cannot assign any input to Port selector.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
IN1
- - - - -
IN2
IN3
- - - - -
is connected to COMPO-
NENT VIDEO IN 1.
is connected to COMPO-
NENT VIDEO IN 2.
is connected to COMPO-
NENT VIDEO IN 3.
HDMI outputs, rather than
the COMPONENT VIDEO
OUT, for the output from
composite video, S-Video,
and component video
sources.