Display - Integra DTR-50.1 Instruction Manual

Front & Rear Panels—Continued

Display

For detailed information, see the pages in parentheses.
Speaker/channel indicators
Indicate the speaker channels used by the current
listening mode.
The following abbreviations indicate which audio
channels are outputted for the current listening
mode.
LW: Front wide left
LH: Front high left
RH: Front high right
RW: Front wide right
FL: Front left
C: Center
FR: Front right
SL: Surround left
SW: Subwoofer (Low Frequency Effects)
SR: Surround right
SBL: Surround back left
SB: Surround back
SBR: Surround back right
Z2 indicator (135)
Lights when Powered Zone 2 is being used.
Z3 indicator (135)
Lights when Powered Zone 3 is being used.
Listening mode and format indicators (83)
Show the selected listening mode and audio input
signal format.
Audyssey (53, 97):
Flashes during Audyssey MultEQ® Room Correc-
tion and Speaker Setup. Lights when the "Equalizer
Settings" is set to "Audyssey" or
Audyssey Dynamic Surround Expansion™ listen-
ing mode is selected.
Dynamic EQ (101):
Lights when "Dynamic EQ" is enabled.
Vol (101):
Lights when "Dynamic Volume" is enabled.
NETWORK indicator (120)
Lights when the Net input selector is selected.
10
Tuning indicators
RDS (Australian models) (77):
Lights when tuned to a radio station that supports
RDS (Radio Data System).
AUTO (64):
Lights when Auto Tuning mode is selected for AM
or FM radio. Goes off when Manual Tuning mode is
selected.
TUNED (64):
Lights when tuned to a radio station.
FM STEREO (64):
Lights when tuned to a stereo FM station.
SLEEP indicator (61)
Lights when the Sleep function has been set.
Bi AMP indicator (50)
Lights when the "Speakers Type(Front)" setting is
set to "Bi-Amp".
Headphone indicator (61)
Lights when a pair of headphones are plugged into
the Phones jack.
Message area
Displays various information.
USB indicator
Lights when a USB mass storage device is detected.
Volume level (59)
Displays the volume level.
MUTING indicator (61)
Flashes while the AV receiver is muted.
Audio input indicators
Indicate the type of audio input that's selected as the
audio source: HDMI, ANALOG, or DIGITAL.