Integra DTR-5.2 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. Receiver
  5. DTR-5.2
  6. Instruction manual

Integra DTR-5.2 Instruction Manual

Integra av receiver instruction manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

AV Receiver
DTR-5.2
Instruction Manual
Thank you for purchasing the Integra AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit. Following the
instructions in this manual will enable you to obtain
optimum performance and listening enjoyment
from your new AV Receiver. Please retain this
manual for future reference.
Contents

Before using

Inportant Safeguards ............................. 2
Precautions ............................................. 3
Features ................................................... 4
Supplied accessories ............................. 4
Before using this unit .............................. 5
Facilities and connections
Front panel facilities ............................... 6
Remote controller .................................. 8
Connections.......................................... 10
Connecting speakers .......................... 16
Connecting the power ........................ 18
Connecting antennas ......................... 19
Setup and operation
Speaker setup ....................................... 21
Using listening mode ............................ 28
Input Setup ............................................ 29
Preference ............................................. 32
Recording .............................................. 33
Remote controller
Using remote controller ....................... 34
remote controller ............................ 40
Using a Macro function ....................... 45
Appendix
Specifications ........................................ 49
Troubleshooting guide ......................... 50

Advertisement

Table of Contents
loading

Related Manuals for Integra DTR-5.2

Summary of Contents for Integra DTR-5.2

  • Page 1: Table Of Contents

    Connecting antennas ... 19 Setup and operation Speaker setup ... 21 Listening to Radio Broadcasts ... 23 Enjoying music or videos with DTR-5.2 ... 25 Using listening mode ... 28 Input Setup ... 29 Preference ... 32 Recording ... 33 Remote controller Using remote controller ...

  • Page 2: Important Safeguards

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

  • Page 3: Precautions

    3. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Integra/Onkyo authorized service sta- tion. 4. Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth.

  • Page 4: Features

    “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.© 1996 Digital Theater Systems, Inc. All rights reserved. Supplied accessories Check that the following accessories are supplied with the DTR-5.2. AM loop antenna × 1 Remote controller × 1 Batteries (AA, R6 or UM-3) ×...

  • Page 5: Before Using This Unit

    Placing the unit behind such doors may prevent proper remote controller operation. • If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate. DTR-5.2 30˚ 30˚ Approx. 16 feet (5 meters)

  • Page 6: Front Panel Facilities

    Front panel facilities Here is an explanation of the controls and displays on the front panel of the DTR-5.2. Front panel Standby/On Standby Power O f f Phones Display Dimmer Front panel display Speakers A/B indicators SPEAKERS SLEEP Sleep indicator...
  • Page 7 Power switch [18] Turns on and off the main power supply for the DTR-5.2. Standby indicator [18] Lights when the DTR-5.2 is in the standby state and flashes when a signal is received from the remote controller. Standby/On button [18] Press to turn on the DTR-5.2 when in the standby state.

  • Page 8: Remote Controller

    SLEEP button [26] Sets the sleep function. The SLEEP button enables you to set the DTR-5.2 to turn off automatically after a specified time period. DIRECT MACRO button [46] For executing and programming the Direct Macro function.
  • Page 9 Remote controller INPUT SELECTOR buttons [25] Selects an input source. Same as the input selector buttons on front panel of the DTR-5.2. The input source for each buttons is given here. DVD:DVD, CD:CD, V1:VIDEO1, V2:VIDEO2, V3:VIDEO3, V4:Not used with the DTR-5.2, T1:TAPE, T2:Not used with the DTR-5.2, TUN:FM/AM,...

  • Page 10: Connections

    Connections Here is explanation of how to connect the main components to the DTR-5.2 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such.
  • Page 11 1. Connecting a turntable (PHONO) Using an RCA-type audio connection cable, connect the output terminal on the turntable to the PHONO input jacks on the DTR-5.2. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.

  • Page 12: Connecting Your Video Components

    Using an RCA-type audio connection cable, connect the audio output terminal on the device to the audio DVD IN jacks on the DTR-5.2. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.
  • Page 13 IR IN/OUT If the DTR-5.2 is located inside a rack or cabinet that will not allow infrared beams to reach the IR sensor, you will need to connect a remote sensor to IR IN input to be able to use the remote controller.
  • Page 14 Power on/ready function When the DTR-5.2 is in the standby state, if an z-connected component is turned on, then the DTR-5.2 also turns on and the input source selected at the DTR-5.2 automatically switches to that component.

  • Page 15: Operating Components Not Reached By The Remote Controller Signals (Ir In/Out)

    When the IR emitter is connected, only the signal input to the IR IN terminal is output to the IR OUT terminal. The signal input from the remote sensor on the front of the DTR-5.2 will not be output to the IR OUT terminal.

  • Page 16: Connecting Speakers

    Connecting speakers Positioning speakers Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies depending on the size of the room and the wall coverings used in the room. The illustration shows an example of a layout for standard speaker placement.
  • Page 17 PRE OUT CHANNEL INPUT DIGITAL INPUT Notes: • The power to the DTR-5.2 must not be turned on when changing the IMPEDANCE SELECTOR setting. • When you are using only one speaker or when you wish to listen to monaural (mono)

  • Page 18: Connecting The Power

    To wall outlet To change the display of the input source from TAPE to If you connected an MD recorder to the TAPE jack on the DTR-5.2, you can have “MD” appear when the Tape source button is pressed. By changing the display, if an Onkyo MD recorder z-connected, the z system functions will become enabled.

  • Page 19: Connecting Antennas

    Connecting antennas To use the tuner of DTR-5.2, it is necessary to prepare the supplied FM and AM antennas. • Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast.
  • Page 20 Connecting antennas Connecting an FM outdoor antenna Please make sure that you follow the considerations: • Keep the antenna away from noise sources (neon signs, busy roads, etc.). • It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc.

  • Page 21: Speaker Setup

    Video 2 Video 3 Jog dial and indicators Speaker Configuration These settings tell the DTR-5.2 which speakers you have connected and what size they are. 1. Press the Setup (SETUP) button. If anything other than “1. SPEAKER SETUP” appears, turn the jog dial or press the cursor buttons on the remote controller until “1.

  • Page 22: Speaker Distance

    Speaker setup Speaker Distance These settings tell the DTR-5.2 how far away your speakers are located from the listening position so that it can provide the optimum sound space. If you are continuing from setting the speaker configuration and are still in the setup mode, skip directly to step 2.

  • Page 23: Listening To Radio Broadcasts

    Listening to Radio Broadcasts One of the features of the DTR-5.2 that is most frequently used is its ability to play FM and AM broadcast radio stations. The DTR-5.2 provides a number of listening modes perfect for listening to the radio and getting the most out of your audio system.
  • Page 24 Listening to Radio Broadcasts Standby/On Standby Power O f f Display Dimmer Phones Audio Selector Preset Memory Presetting a radio station 1. Tune into the radio station you desire (see “Tuning into a radio station” ). 2. Press the Preset Memory button on the front panel.

  • Page 25: Enjoying Music Or Videos With Dtr-5.2

    Note: If you want to switch between Dolby Pro Logic II Movie and Dolby Pro Logic II Music at the DTR-5.2, press the jog dial and select “SURROUND” for the listening mode. When using the remote controller (for more details, see page 9) 1.
  • Page 26 Listening mode Using the sleep time (Remote controller only) The SLEEP button enables you to set the DTR-5.2 to turn off automatically after a specified time period. If you press it once, the DTR-5.2 will turn off after 90 minutes. Each time it is pressed thereafter, the remaining time until the DTR-5.2 turns off decreases...
  • Page 27 To make the Bass and Treble dials work for multichannel sources, you must first set the tone control to “ON.” 1. Turn the tone control on by pressing either the jog dial on the DTR-5.2 or the DIRECT button on the remote controller. DSP / Mode ADJ...

  • Page 28: Using Listening Mode

    (OPTICAL or COAXIAL) to connect the DTS source. • The DTS indicator on the DTR-5.2 lights while a DTS source is played. When playback finishes and the DTS signal transmission stops, the DTR-5.2 remains in DTS mode and the DTS indicator remains lit.

  • Page 29: Input Setup

    To exit the setup mode immediately, press the Setup (SETUP) button. Listening Mode Preset With the DTR-5.2, you can set a different listening mode for each different signal type that comes from each input source. For example, with the default settings, even when using the same DVD player, if a CD is played, the listening mode automatically becomes “STEREO,”...
  • Page 30 Input Setup 1. Select the desired input source. DTR-5.2 Video 1 Video 2 Video 3 Tape Remote controller 2. Press the Setup (SETUP) button. Turn the jog dial or press the buttons on the remote controller to display “2. INPUT SETUP.”...
  • Page 31 IntelliVolume When switching input sources, you may find that the output level for different components or input sources connected to the DTR-5.2 is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source.

  • Page 32: Preference

    When Maximum Volume is not set, set this to OFF. Power On Volume (POWERONVOL): This sets a designated volume setting for the DTR-5.2 to be set every time that the power is turned on. This prevents the DTR-5.2 from being turned on while it is set to an extremely high volume and suddenly output very loud sounds.

  • Page 33: Recording

    Recording The DTR-5.2 can also be used to record an input source media. This allows you to make copies of the music or videos you like, copy them from one type of media to another, or even record what is being broadcast on television or radio.

  • Page 34: Using Remote Controller

    For example, if you wish to select the CD input source at the DTR-5.2 with the remote controller, first press the RCVR MODE button to select the DTR-5.2 and then press the CD (INPUT SELECTOR) button. Calling up a preset radio station 1.
  • Page 35 DISC HOME THEATER CONTROLLER RC-441M Controlling an Integra/Onkyo CD player The z connector of the Integra/Onkyo compact disc player must be connected to the DTR-5.2 (see page 14). 1. Press the CD MODE button. STDBY The CD MODE button lights green.
  • Page 36 ANGLE HOME THEATER CONTROLLER RC-441M Controlling an Integra/Onkyo DVD player The z connector of the Integra/Onkyo DVD player must be connected to the DTR-5.2 (see page 14). 1. Press the DVD MODE button. The DVD MODE button lights green. 2. Press the desired operation button.
  • Page 37 HOME THEATER CONTROLLER RC-441M CABLE Controlling an Integra/Onkyo MD recorder The z connector of the Integra/ONKYO MD recorder must be connected to the DTR-5.2 (see page 14). 1. Press the MD MODE button. The MD MODE button lights green. 2. Press the desired operation button.

  • Page 38: Learning A Pre-Programming Code

    613. No. 600: This code is for Integra/Onkyo DVD players that have an z terminal that you are connecting to the DTR-5.2 with an z cable. You will then operate the DVD player by pointing the remote controller at the remote control sensor on the DTR-5.2. You do not need to enter this code because it is factory preset.
  • Page 39 BRAND SETTING No. DENON 602, 609 HITACHI KENWOOD MAGNAVOX 606, 613 MARANTZ MITSUBISHI 608, 613 INTEGRA 600, 601, 613 ONKYO 600, 601, 613 PANASONIC PIONEER PROSCAN SONY TOSHIBA YAMAHA 609, 614 ZENITH...

  • Page 40: Operating Your Programmed Remote Controller

    0,1 to 9: Numeric keys ENTER: Confirm You may also use the following buttons: : Adjusts the volume at the DTR-5.2 MUTING: Activates the muting function at the DTR-5.2 Numeric keys ENTER CABLE MODE (Cable Mode) 1. Press the CABLE MODE button.
  • Page 41 0,1 to 9, +10: Numeric keys You may also use the following buttons: Numeric keys : Adjusts the volume at the DTR-5.2 MUTING: Activates the muting function at the DTR-5.2 TV MODE (TV Mode) 1. Press the TV MODE button. The TV button lights green.

  • Page 42: Programming The Commands Of Remote Controllers For Other Devices Into The Remote Controller

    Programming the commands of remote controllers for other devices into the remote controller 2 to 6 inches (5 to 15 cm) HOME THEATER CONTROLLER RC-441M Programming procedure When programming the commands of another remote controller to the RC-441M remote controller, you must first decide under which MODE button you want the commands to be linked.

  • Page 43: Programming The Commands Of Remote Controllers For Other Devices Into The Remote Controller

    7. Operate the newly programmed buttons to make sure the learning function was performed properly. Notes: • The remote controller codes for Integra/Onkyo compact disc players, cassette tape decks, DVD players, and mini disc recorder have already been programmed into buttons on the remote controller.
  • Page 44 Programming the commands of remote controllers for other devices into the remote controller HOME THEATER CONTROLLER RC-441M HOME THEATER CONTROLLER RC-441M Erasing the programmed command from one SEND/LEARN button indicator You can only erase memorized commands and not preset ones. 1.

  • Page 45: Using A Macro Function

    1. Point the remote controller at the DTR-5.2 and press the CD MODE button. 2. Press the MODE MACRO, and verify that the devices operate properly.
  • Page 46 1. Point the remote controller at the DTR-5.2 and press the DIRECT MACRO button. It may take a while for the macro to finish transmitting, so be sure to continue pointing the remote controller at the device until the SEND/LEARN indicator turns off.
  • Page 47 Using a Macro function MODE buttons HOME THEATER CONTROLLER RC-441M DIRECT MACRO HOME THEATER CONTROLLER RC-441M Erasing a macro from the MODE MACRO button 1. Press and hold down the desired MODE button, press the MODE MACRO button, and then release both buttons.
  • Page 48 Using a Macro function HOME THEATER CONTROLLER RC-441M Macro mode programming memo: MACRO MODE MODE MACRO MACRO ↓ ↓ RCVR Operation 1 Operation 2 Operation 3 Operation 4 Operation 5 Operation 6 Operation 7 Operation 8 Operation 9 Operation 10 Operation 11 Operation 12 Operation 13...

  • Page 49: Specifications

    Specifications AMPLIFIER SECTION Continuous Average Power output (FTC) All channels: 75 W per channel min. RMS at 8 Ω, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 100 W min. RMS at 6 Ω, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion.

  • Page 50: Troubleshooting Guide

    If a problem occurs while you are using the remote controller, first try to operate the controls on the front panel of the DTR-5.2 to make sure that it is not due to a malfunction (or worn out batteries) in the remote controller.
  • Page 51 * To reset the surround mode and other settings to the factory default settings, hold down the Preset Memory button with the DTR-5.2 turned on and then press the Standby/On button. “CLEAR” appears in the front display and the DTR-5.2 enters the standby state.
  • Page 52 Integra Division of ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 E-mail: integra@onkyousa.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222...

Table of Contents