Tv Format Setup (Not North American Model) - Integra DTR-5.8 Instruction Manual

Hide thumbs Also See for DTR-5.8:
Table of Contents

Advertisement

First Time Setup—Continued
4
Use the Up and Down [
buttons to select "Speaker
Impedance," and then use the
Left and Right [
select:
4 ohms: Select if the impedance of any
6 ohms: Select if the impedances of all
If the Speakers Type setting in step 5 is
set to Bi-Amp, this setting can not be
selected.
5
Use the Up and Down [
buttons to select "Speakers
Type," and then use the Left and
Right [
Normal: Select this if you've con-
Bi-Amp:Select this if you've con-
6
Press the [Setup] button.
The Setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
TV Format Setup
(not North American model)
You must specify the TV system used in your area.
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
52
]/[
]
]/[
] buttons to
speaker is 4 ohms or more but
less than 6.
speakers are between 6 and
16 ohms.
]/[
]
]/[
] buttons to select:
nected your front speakers
normally.
nected your front speakers for
bi-amped operation.
2
Use the Up and Down [
buttons to select
"6. Miscellaneous," and then
press [Enter].
The Miscellaneous menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
3
Use the Up and Down [
buttons to select "2. OSD Setup,"
and then press [Enter].
The OSD Setup menu appears.
6–2. OSD Setup
Immediate Display
Monitor Type
Display Position
TV Format
4
Use the Up and Down [
buttons to select "TV Format,"
and then use the Left and Right
[
]/[
] buttons to select:
Auto: Select this to automatically
NTSC: Select if the TV system in
PAL: Select if the TV system in
5
When you've finished, press the
[Setup] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
]/[
]
]/[
]
On
4 : 3
Bottom
Auto
]/[
]
detect the TV system from
the video input signals.
your area is NTSC.
your area is PAL.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents