Integra DTR-50.1 Instruction Manual page 106

Advanced Setup—Continued
ISF Mode
The receiver has been designed to incorporate setup and calibration standards established by the Imaging Sci-
ence Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal
video performance and has implemented a training program for technicians and installers to use these standards
to obtain optimal picture quality from the receiver. Accordingly, recommends that setup and calibration be
performed by an ISF Certified installation technician.
Picture Mode
The AV receiver will adjust to the picture source, processing in either "3:2" or "2:2" (Picture Mode). It auto-
matically converts the source to the appropriate progressive signal and reproduces the natural quality of the
original picture.
When the "Picture Mode" setting is set to "Auto", the AV receiver automatically detects the picture source and
in either "3:2" or "2:2". However, there may be times when you will get a better picture by setting "Picture
Mode" yourself.
Note:
If the "Game Mode" setting is set to "On", this setting is fixed at "Video".
Edge Enhancement
With this setting you can adjust the sharpness of edges in the picture. "0" is the softest. "+10" is the sharpest.
Noise Reduction
With this setting, you can reduce noise appearing on the screen.
Note:
If the "Game Mode" setting is set to "On", this setting is fixed at "Off".
*1
Resolution
You can specify the output resolution for the HDMI outputs and have the AV receiver upconvert the picture
resolution as necessary to match the resolution supported by your TV.
Available only when "Source" has been selected in the "Monitor Out" setting.
*1
Brightness
With this setting you can adjust the picture brightness. "–50" is the darkest. "+50" is the brightest.
106
Custom: User setting (All items can be freely set.)
Day: Setting when a room is bright.
Night: Setting when a room is dark.
*1 Video: Does not process in either "3:2" or "2:2" (default).
Auto: Adjusts to the picture source, automatically selecting "Picture Mode".
3:2: Selected when the picture source is movie film, etc.
2:2: Selected when the picture source is computer graphics, animation, etc.
*1 0 (default) to +10
*1 Off: Noise reduction off.
Low: Low noise reduction (default).
Mid: Medium noise reduction.
High: High noise reduction.
Through: Select this to pass video through the AV receiver at the same resolution
and with no conversion (default).
Auto: Select this to have the AV receiver automatically convert video at
resolutions not supported by your TV. When the "Monitor Out" is set to
"Analog", this setting will be changed to "Through".
480p (480/576p):
Select this for 480p or 576p output and video conversion as necessary.
720p: Select this for 720p output and video conversion as necessary.
1080i: Select this for 1080i output and video conversion as necessary.
1080p: Select this for 1080p output and video conversion as necessary. When
the "Monitor Out" is set to "Analog", this setting will be changed to
"1080i".
–50 to +50 (default: 0)