Integra DTR-50.1 Instruction Manual page 75

Listening to the Radio—Continued
Positioning the SiriusConnect Home
Antenna
You can check the strength of the SIRIUS Satellite Radio
signal and adjust the position of the SiriusConnect Home
antenna accordingly.
Tuner
Enter
Setup
1 Press the [Receiver] button, fol-
lowed by the [Tuner] button, and
Remote
[Setup] button.
controller
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ] but-
tons to select "7. Hardware
Setup", and then press [Enter].
The "Hardware Setup" menu appears.
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Network
6. Firmware Update
Note:
If the "SAT Radio Mode" is set to
"None" (see page 67), the "Antenna
Aiming" item is not available.
3
Receiver
4
5
Notes:
• So long as the signal strength is good, you can enjoy
SIRIUS Satellite Radio by using either satellite or ter-
restrial reception.
• Terrestrial signals are only available in certain areas.
• The SIRIUS information on the Satellite Radio screen
is only displayed when the "SAT Radio Mode" is set
to "SIRIUS" (see page 67).
Use the Up and Down [ ]/[ ] but-
tons to select "3. Tuner", and
then press [Enter].
The "Tuner" screen appears.
7–3. Tuner
FM/AM Frequency Step 200kHz/10kHz
SAT Radio Mode SIRIUS
Antenna Aiming
SIRIUS Parental Lock
Use the Up and Down [ ]/[ ] but-
tons to select "Antenna Aiming",
and then press [Enter].
The Satellite Radio screen appears.
The name of the currently selected
input selector is displayed in a box.
Position the SiriusConnect Home
antenna so that as many bars as
possible (up to 3) appear on the
SIRIUS Satellite signal strength
meter.
Antenna Aiming
SIRIUS
Satellite Terrestrial
SIRIUS ID - - - - - - - - - - - -
If you cannot receive a satellite signal,
position the SiriusConnect Home
antenna so that as many bars as possible
(up to 3) appear on the SIRIUS Terres-
trial signal strength meter.
75