Integra DTR-50.1 Instruction Manual page 113

Advanced Setup—Continued
HDMI Control (RIHD)
This function allows
receiver.
Notes:
• , which stands for Remote Interactive over HDMI, is the name of the system control function found
on Integra/Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control),
which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability
between various components, however, operation with components other than
nents cannot be guaranteed.
When set to "On" and close the menu, the name of connected
"RIHD On" are displayed on the AV receiver.
→
"Search..." "(name)"
When the AV receiver cannot receive the name of the component, it is displayed as "Player*" or
"Recorder*", etc ("*" means the number of two or more component).
When set to "Off" and close the menu, "RIHD Off" are displayed on the AV receiver.
→
"Disconnect"
• Set it to Off when a connected piece of equipment is not compatible or it is unclear whether the equipment
" "
is compatible or not.
• Set it to "Off" if the operation is not successful.
• Refer to the connected component's instruction manual for details.
• The control does not support HDMI OUT SUB. Use HDMI OUT MAIN instead.
On: enabled.
Off: disabled (default).
-compatible components connected via HDMI to be controlled with the AV
→
"RIHD On"
"RIHD Off"
-compatible compo-
-compatible components and
113