Connecting A Dvd Player - Integra DTR-50.1 Instruction Manual

Connecting the AV receiver—Continued

Connecting a DVD Player

See "Connecting Components with HDMI" on page 24 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your DVD player ( ,
You must connect the AV receiver to your TV via the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches your DVD player ( ,
• With connection
• To enjoy Dolby Digital and DTS, use connection
and , or
a b a
• If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the
main left and right outputs for connection
Connection
COMPONENT VIDEO IN 1 (DVD/BD)
A
B
C
a
DIGITAL COAXIAL IN 1 (DVD/BD)
b
c
b
c
COAXIAL
When you use connection
30
, you can listen to and record audio from your DVD player or listen in Zone 2 or Zone 3.
a
and .)
c
AV receiver
DVD/BD IN S
DVD/BD IN V
DVD/BD IN L/R
DIGITAL OPTICAL IN 1 (GAME)
L R
OPTICAL AUDIO S VIDEO
OUT OUT OUT
, you need to assign the digital audio input (see page 49).
c
, or
A B C
, or
a b c
or . (To record or listen in Zone 2 or Zone 3 as well, use
b c
.
a
Signal flow
⇐
⇐
⇐
⇐
⇐
⇐
VIDEO Y P P
B R
OUT OUT COMPONENT VIDEO OUT
, and then make the connection.
)
), and then make the connection.
DVD player
Component video output
S-Video output
Composite video output
Analog audio L/R output
Digital coaxial output
Digital optical output
C
a
B
DVD player
A