Tv Format Setup (Not North American Models) - Integra DTR-7.9 Instruction Manual

First Time Setup—Continued
TV Format Setup
(not North American models)
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select "6. Miscella-
neous", and then press [Enter].
The "Miscellaneous" menu appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select "2. OSD Setup",
and then press [Enter].
The "OSD Setup" menu appears.
46
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
6–2. OSD Setup
Immediate Display On
Monitor Type 16 : 9
Display Position Bottom
TV Format Auto
Language English
4 Use the Up and Down [ ]/[ ] but-
tons to select "TV Format", and
then use the Left and Right [ ]/
[ ] buttons to select:
Auto: Select this to automatically
NTSC: Select if the TV system in
PAL: Select if the TV system in
5 When you've finished, press the
[Setup] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
detect the TV system from the
video input signals.
your area is NTSC.
your area is PAL.