Integra DTR-50.1 Instruction Manual page 72

Hide thumbs Also See for DTR-50.1:
Table of Contents

Advertisement

Listening to the Radio—Continued
3
Use the Up and Down [ ]/[ ] but-
tons to select "3. Tuner", and
then press [Enter].
The "Tuner" screen appears.
4
Use the Up and Down [ ]/[ ] but-
tons to select "SIRIUS Parental
Lock", and then press [Enter].
The "SIRIUS Parental Lock" screen
appears.
Note:
If the "SAT Radio Mode" is set to
"None" (see page 67), the "SIRIUS
Parental Lock" item is not available.
72
7–3. Tuner
FM/AM Frequency Step
200kHz/10kHz
SAT Radio Mode
SIRIUS
Antenna Aiming
SIRIUS Parental Lock
SIRIUS Parental Lock
Enter Code
0
1
2
3
4
5
6
7
8
9
5
Use the Left and Right [ ]/[ ]
buttons to select a number on the
screen, and then press [Enter].
Repeat this for each of the four
digits in the PIN number.
If you're entering the PIN number for
the very first time, the PIN is stored,
and the following screen appears.
SIRIUS Parental Lock
Edit Code
Parental Lock
If you've already set a PIN number, you
must enter the correct PIN to get to this
screen. If you enter the wrong PIN, the
message "Wrong Code!" appears and
you'll have to enter the PIN again.
Note:
The "SIRIUS Parental Lock" cannot be
set unless the AV receiver and the Siri-
usConnect receiver are connected.
6
Use the Up and Down [ ]/[ ] but-
tons to select "Parental Lock",
and then press [Enter].
The "Parental Lock" screen appears.
7
Use the Up and Down [ ]/[ ] but-
tons to select a channel, and use
the Left and Right [ ]/[ ] but-
tons to select "Locked" or
"Unlocked".
The number, name, and status of the
currently selected channel is displayed.
->

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents