Installation Overview For The Srx240 Services Gateway - Juniper SRX240 Hardware Manual

CHAPTER 6
Installation Overview for the SRX240
Services Gateway

Installation Overview for the SRX240 Services Gateway

Copyright © 2013, Juniper Networks, Inc.
This chapter includes the following topic:
Installation Overview for the SRX240 Services Gateway on page 37
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 19 on page 37.
Table 19: Installation Process Sequence for the SRX240 Services Gateway
Steps Process
1 Review the safety guidelines.
2 Verify that you have prepared your site
for the installation of the services
gateway using the checklist.
3 Unpack the services gateway and verify
that the parts are received.
4 Prepare the services gateway for
installation.
5 Install the services gateway.
For More Information
"SRX240 Services Gateway Safety
Requirements, Warnings, and
Guidelines" on page 43
"Site Preparation Checklist for the
SRX240 Services Gateway" on page 31
"Unpacking the SRX240 Services
Gateway" on page 41
"Preparing the SRX240 Services
Gateway for Installation" on page 43
"Installing the SRX240 Services
Gateway" on page 44
37