Configuring Power Over Ethernet On The Srx240 Services Gateway - Juniper SRX240 Hardware Manual

Configuring Power over Ethernet on the SRX240 Services Gateway

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
To enable the PoE support on your SRX240 services gateway to work properly, you must
configure the services gateway.
You can configure PoE using Junos OS CLI.
For more details on configuring the PoE, see the
SRX240 Services Gateway Power over Ethernet Overview on page 25
SRX240 Services Gateway Description on page 3
SRX240 Services Gateway Built-In Interfaces on page 12
SRX240 Services Gateway LEDs on page 14
Chapter 4: SRX240 Services Gateway Power over Ethernet Support
Interfaces for Security Devices .
27