Srx240 Services Gateway Fire Safety Requirements - Juniper SRX240 Hardware Manual

Srx240 services gateway
Hide thumbs Also See for SRX240:
Table of Contents

Advertisement

Related
Documentation

SRX240 Services Gateway Fire Safety Requirements

Copyright © 2013, Juniper Networks, Inc.
Figure 23: Placing a Component into an Electrostatic Bag
SRX240 Services Gateway Definition of Safety Warning Levels on page 109
SRX240 Services Gateway Fire Safety Requirements on page 115
SRX240 Services Gateway Installation Safety Guidelines and Warnings on page 116
SRX240 Services Gateway Laser and LED Safety Guidelines and Warnings on page 121
SRX240 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 125
SRX240 Services Gateway Electrical Safety Guidelines and Warnings on page 130
In the event of a fire emergency involving devices and other network equipment, the
safety of people is the primary concern. Establish procedures for protecting people in
the event of a fire emergency, provide safety training, and properly provision fire-control
equipment and fire extinguishers.
In addition, establish procedures to protect your equipment in the event of a fire
emergency. Juniper Networks products should be installed in an environment suitable
for electronic equipment. We recommend that fire suppression equipment be available
in the event of a fire in the vicinity of the equipment and that all local fire, safety, and
electrical codes and ordinances be observed when installing and operating your
equipment.
In the event of an electrical hazard or an electrical fire, first turn power off to the equipment
at the source. Then use a Type C fire extinguisher to extinguish the fire. Type C fire
extinguishers, which use noncorrosive fire retardants such as carbon dioxide (CO
Halotron, are most effective for suppressing electrical fires. Type C fire extinguishers
displace the oxygen from the point of combustion to eliminate the fire. For extinguishing
fire on or around equipment that draws air from the environment for cooling, use this
Appendix A: Safety and Regulatory Compliance Information
) and
2
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents