Running The Setup Wizard; Performing Initial Software Configuration On The Srx240 Services Gateway - Juniper SRX240 Hardware Manual

Running the Setup Wizard

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Performing Initial Software Configuration on the SRX240 Services Gateway
NOTE: In the Guided Setup mode, make sure you have configured the Ethernet
interface you will be using for management access before you commit the
configuration. If you do not do so, you can lose access to the J-Web interface.
If you lose access to the J-Web interface, you can:
Make a console connection to the services gateway and configure access
using the CLI.
Reset the services gateway to its factory default configuration as described
in "Loading the Rescue Configuration on the SRX240 Services Gateway"
on page 105. This allows you to regain access to the setup wizard and restart
the initial configuration.
To run the setup wizard:
Connect a laptop or desktop computer to any of the ports 0/1 through 0/15 as
1.
described in "Connecting to the SRX240 Services Gateway Setup Wizard" on page
If you will be using the setup wizard to download purchased licenses, connect your
2.
services gateway to the Internet on port 0/0.
Open a Web browser on your laptop or desktop.
3.
NOTE: Supported browsers are Windows Internet Explorer versions 7, 8,
and 9 and Mozilla Firefox versions 4 and 5. The minimum screen resolution
is 800 by 600 pixels.
Enter one of the following URLs: http://192.168.1.1 or https://192.168.1.1
4.
When the Welcome page for the setup wizard appears, choose the setup mode you
want to use to configure the services gateway.
After you finish configuring the services gateway with the setup wizard and commit your
configuration, you are redirected to the J-Web interface. Thereafter, whenever you connect
to the services gateway, you are placed in the J-Web interface. You can access the setup
wizard from the J-Web interface and use it to reconfigure your services gateway. To do
so, select >
Configuration Tasks
Connecting to the SRX240 Services Gateway Setup Wizard on page 63
SRX240 Services Gateway Software Configuration Overview on page 71
Performing Initial Software Configuration on the SRX240 Services Gateway Using the
CLI on page 78
SRX240 Services Gateway Secure Web Access Overview on page 85
> .
Run Setup Wizard
63.
77