Srx240 Services Gateway Installation Safety Guidelines And Warnings; Installation Instructions Warning - Juniper SRX240 Hardware Manual

Srx240 services gateway
Hide thumbs Also See for SRX240:
Table of Contents

Advertisement

SRX240 Services Gateway Hardware Guide
Related
Documentation

SRX240 Services Gateway Installation Safety Guidelines and Warnings

Installation Instructions Warning

116
type of inert oxygen displacement extinguisher instead of an extinguisher that leaves
residue on equipment.
Do not use multipurpose Type ABC chemical fire extinguishers (dry chemical fire
extinguishers) near Juniper Networks equipment. The primary ingredient in these fire
extinguishers is monoammonium phosphate, which is very sticky and difficult to clean.
In addition, in minute amounts of moisture, monoammonium phosphate can become
highly corrosive and corrodes most metals.
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE:
To keep warranties effective, do not use a dry chemical fire extinguisher
to control a fire at or near a Juniper Networks services gateway. If a dry
chemical fire extinguisher is used, the unit is no longer eligible for coverage
under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
SRX240 Services Gateway Definition of Safety Warning Levels on page 109
SRX240 Services Gateway General Safety Guidelines and Warnings on page 111
SRX240 Services Gateway Installation Safety Guidelines and Warnings on page 116
SRX240 Services Gateway Laser and LED Safety Guidelines and Warnings on page 121
SRX240 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 125
SRX240 Services Gateway Electrical Safety Guidelines and Warnings on page 130
This topic includes the following sections:
Installation Instructions Warning on page 116
Rack-Mounting Requirements and Warnings on page 118
NOTE:
The SRX240 Services Gateway can be installed as customer premises
equipment (CPE) only.
WARNING:
Read the installation instructions before you connect the services
gateway to a power source.
Copyright © 2013, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents