18 CONTRACTURE FOOT ASSEMBLY
18.3 Depth Adjustment
Bilateral Contracture Footplate
1.
Remove the two flat screws and locknuts that secure the contracture footplate to the footplate angle bracket.
2.
Move the contracture footplate to one of four mounting holes.
3.
Reinstall the four flat screws and locknuts that secure the contracture footplate to the footplate angle bracket. Tighten securely.
4.
If necessary, repeat STEPS 1-3 on remaining contracture footplate.
Invacare® Solara®3G/Spree 3G Wheelchair
Locknuts
(Underneath)
FIGURE 4 Depth Adjustment - Bilateral Contracture Footplate
Mounting Holes
Footplate Angle Bracket
126
Contracture
Footplate
Flat Screws
Part No 1154295