About Section - Fluke 9100 User Handbook Manual

Section 10 Calibrating the Model 9100
10.1

About Section 10

Section 10 outlines general procedures for calibrating the Model 9100. In it you will find
the recommended calibration methods, details of the parameters that require calibration
and the procedures needed to calibrate them.
This section is divided into the following sub-sections:
10.2 The Model 9100's Calibration Mode
Selection of Calibration Mode, Special Calibration and Standard
Calibration.
10.3 Standard Calibration — Basic Sequences
Using the function, target selection and calibrate screens
10.4 Front-panel Calibration of Model 9100 Functions
Lists of calibration points, equipment requirements, interconnections,
procedures and recording for all Functions requiring calibration.
10.5 Remote Calibration of the Model 9100 via the IEEE-488 Interface
The Model 4950 MTS System.
Section 10: Calibrating the Model 9100: About Section 10
Final Width = 215mm
10.1-1