Fluke 9100 User Handbook Manual page 154

Final Width = 215mm
8-22 Section 8: Model 9100 — Routine Maintenance and Test
8.3.4.5 Memory Card Checks
The next test is to check the size of the card memory. While the 9100 is checking, it will
place the following message on the screen:
Card slot test.
Checking card size.
TODAYS DATE
Once the size check is completed, the 9100 starts on a 'read/write' check; meanwhile the
display changes to:
Card slot test.
Card size: XXXX k Bytes
Performing READ/WRITE test.
TODAYS DATE
After the read/write check, the 9100 starts on a 'walking ones' check, and the message
on the display changes to:
Performing WALKING ONES test.
The test continues, this time to format the memory into 'Results Card' format. A new
message appears on the display:
Performing RESULTS CARD format.
(Contd.)
TIME
TIME