Insulation Resistance Calibration - Fluke 9100 User Handbook Manual

10.4.9

Insulation Resistance Calibration

10.4.9.1 Introduction
This sub-section is a guide to calibrating the Model 9100's Insulation Resistance function
(part of Option 135) using the front panel controls.
Due to the high voltages and high resistance values required, it is not practical to calibrate
the Option 135 Insulation Resistance function using a standard resistance meter. Special
equipment is used at manufacture to calibrate this function of the Model 9100 before
shipment.
The following topics are covered in this sub-section:
10.4.9.2 Calibration Equipment Requirements
10.4.9.3 Interconnections
10.4.9.4 Calibration Setup
10.4.9.5 Calibration Procedure
10.4.9.6 Verification of Output Voltage Display
Section 10: Calibrating the Model 9100: Insulation Resistance Function
Final Width = 215mm
10.4-51