Fluke 9100 User Handbook Manual page 149

8.3.4.2 Display Memory Checks
Pressing the DISPLAY MEMORY key on the 'Select test' menu screen transfers to the
'Memory test.' screen, and the sequence of tests begins. The test in progress is reported
on the screen:
D I S P L A Y
Selftest.
M E M O R Y
K E Y B R D
Select test using softkeys
D I S P L A Y
M E M O R Y
C A R D
T R A C K E R
P R I N T E R
TODAYS DATE TIME
E X I T
The other tests reported are:
Performing WALKING ONES test 1.
Performing READ/WRITE test 2.
Performing WALKING ONES test 2.
The result of the whole Memory test is reported once testing is complete:
Memory test.
Display memory PASSED.
TODAYS DATE TIME
E X I T
If a failure is reported, rectification will require access to the internal circuitry, so no
further user action is recommended, except to report the result to your Fluke Service
Center.
EXIT returns to the Interface ' Select test
Section 8: Model 9100 — Routine Maintenance and Test
Memory test.
Performing READ/WRITE test 1.
TODAYS DATE TIME
Memory test.
Display memory FAILED.
TODAYS DATE TIME
E X I T
' menu screen.
Final Width = 215mm
8-17