Troubleshooting The Installation Of The License File And The Avaya Authentication File - Avaya S8400 Installing & Configuring

Appendix B: Installation troubleshooting
Troubleshooting the installation of the license file and
the Avaya authentication file
Problem
Cannot get files from the RFA site
Cannot install the license file
The server is in no-license mode
Cannot use the administration
commands
ASG does not work
Cannot install the authentication
file
82
Installing and Configuring the Avaya S8400 Server
Possible solution
Provide the correct SAP number.
Provide the serial number for the SIPI.
Ensure that two license files do not exist on the server.
If so, delete one of the files.
The file might be corrupt. Download the file again from
the RFA site.
Use binary mode to upload the file.
The license file does not have an IP address yet. This
situation is normal when the license file is first installed
because the file cannot see the SIPI.
After 30 minutes, the license file has not located the
SIPI. In a SAT session, type reset system 1 and
press Enter to reset the 30-minute clock.
The server might be in no license mode because the
30-minute timer lapsed. In a SAT session, type reset
system 1 and press Enter to reset the 30-minute
clock.
Re-install the Avaya authentication files.
Administer a super-user login on the active server.
January 2008