Services Access Port - Avaya S8400 Installing & Configuring

Chapter 1: Introduction

Services access port

The S8400 Server has one port for Services access. This port is off the Maintenance Processor.
Use this port to access the MPC and the server on the S8400AP circuit pack by way of the
Services laptop computer. For more information on connecting to the Services port on the
S8400 and for the location of the Services port on the S8400 Server,
directly on page 71.
Table 5: Services access on the MPC
receives Service requests on two TCP ports, 10022 (SSH access) and 10443 (Secure Web
access).
Note:
With Release 4.0 or later of Communication Manager, Telnet is disabled, so you
Note:
must use SSH to access servers after Communication Manager software
Release 4.0 or later is installed.
Table 5: Services access on the MPC
Access
method
Services laptop
Services laptop
Services laptop
Services laptop
Services laptop
Services laptop
Modem dial-in
Modem dial-in
Modem dial-in
Modem dial-in
Modem dial-in
16
Installing and Configuring the Avaya S8400 Server
on page 16 lists the Services access protocols. The MPC
Service IP address
requested
HTTPS 192.11.13.6
SSH 192.11.13.6
SSH 192.11.13.6
HTTPS 192.11.13.6
Telnet 192.11.13.6
Telnet 192.11.13.6
PPP>SSH Modem IP
address
PPP>HTTPS Modem IP
address
PPP>SSH Modem IP
address
PPP>HTTPS Modem IP
address
PPP>Telnet Modem IP
address
Connecting to the server
TCP Service granted
port
10443 Secure Web access to the MPC
10022 SSH access to the MPC
22 Secure Shell access to the
server
443 Secure Web access to the
server
23 Access to the server
5023 Access to the SAT on the server
10022 Secure Shell access to the MPC
10443 Web HTTPS access to the MPC
22 Secure Shell access to the
server
443 Secure Web access to the
server
23 Access to the server
1 of 2
January 2008