Troubleshooting The Installation Of License Files And Avaya Authentication Files - Avaya S8400 Installing And Configuring

Media server
Hide thumbs Also See for S8400:
Table of Contents

Advertisement

Appendix B: Installation troubleshooting
Troubleshooting the installation of license files and Avaya
authentication files

Troubleshooting the installation of license files and Avaya authentication files

Problem
Cannot get files from RFA site
License file does not install
Media server is in no license
mode
Cannot use administration
commands
ASG does not work
86
Installing and Configuring the Avaya S8400 Media Server
Possible solution
Provide the correct SAP number.
Provide the serial number for the SIPI
Make sure there are not two license files on the
server. If so, delete one of them.
May have corrupt file. Download file again from RFA
site.
Upload using binary mode.
Normal situation when license file is first installed
because it cannot see the SIPI; it does not have IP
address yet.
After 30 minutes, license has not located SIPI. In a
SAT session, type reset system 1 and press Enter
to reset the 30-minute clock.
May be in No License Mode because 30-minute timer
has lapsed. In a SAT session, type reset system 1
and press Enter to reset the 30-minute clock.
Re-install Avaya authentication files.
February 2006

Advertisement

Table of Contents
loading

Table of Contents