Chapter 1: Introduction; Audience - Avaya S8400 Installing & Configuring

Chapter 1: Introduction

Use these procedures to install Avaya Communication Manager and configure a new Avaya
S8400 Server and the associated components.
To configure the server, use the Avaya Installation Wizard. To configure gateways and other
hardware components, use the following two administration interfaces:
The Maintenance Web Interface
The command line interface, either directly or through Secure Shell (SSH), Telnet, or a
terminal emulation program such as Avaya Native Configuration Manager.
This installation document includes the following information:
Pre-installation requirements
Configuring the SNMP modules in the UPS
Server configuration
IP interface translations
IP interface configuration
Postinstallation administration
Installation verification
Server access
Installation troubleshooting

Audience

This documentation is for the following people who install and configure the server components:
Trained field installation and maintenance personnel
Technical support personnel
Authorized business partners
Installing and Configuring the Avaya S8400 Server
on page 9
on page 29
on page 41
on page 45
on page 51
on page 59
on page 69
on page 79
on page 21
7
January 2008