Chapter 7: Postinstallation administration
This section covers the following tasks:
Verifying translations
Setting rules for daylight savings time
Setting locations (if necessary)
Verifying the date and the time (main server only)
Clearing and resolving alarms
Backing up files to the compact flash media
Enabling alarms to INADS by way of a modem
Enabling alarms to INADS by way of the SNMP module
Before leaving the site
Verifying translations
1. Open a SAT session on the server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
IPSI For more information, see your planning documents and check the administration status
on the following items:
list station
list trunk-group
list hunt-group
Installing and Configuring the Avaya S8400 Server
on page 51
on page 52
on page 53
on page 55
on page 56
on page 54
on page 56
on page 55
on page 55
51
January 2008