Running The Avaya Installation Wizard; Verifying The Mpc Ip Information; Installing Mpc Firmware - Avaya S8400 Installing & Configuring

Type the information manually with the completed EPW as a guide. The Installation Wizard
prompts you to enter the configuration data for each step in the Configure Server section.

Running the Avaya Installation Wizard

1. With the Web browser open, type 192.11.13.6 and press Enter in the browser address
window to display the login page.
2. Log in as craft and use the initial craft password.
3. Click Launch Avaya Installation Wizard.
4. Follow the prompts. For more information use Help on each page.
!
!
WARNING:
If the time zone is set in the AIW, you must reboot the server after AIW
WARNING:
completes.
5. Reboot the server:
a. Click Shutdown Server under the Server heading.
b. Select Delayed Shutdown and Restart server after shutdown.
c. Click Shutdown.
You will be logged off the server when it reboots. You can use ping to verify when the
server is accessible again.

Verifying the MPC IP information

The Maintenance Processor Complex (MPC) page is under Optional Services in the
Installation Wizard configuration process. Verify that the Installation Wizard retrieved the IP
information from the EPW. If the information is not there, complete all fields manually.
To allow Services access to the MCP through a cross-over cable, verify the information in the
following fields:
IP Address 192.11.13.6
Subnet Mask 255.255.255.252
If the information is not there, complete the fields manually.

Installing MPC firmware

You might need to update the MPC firmware if the most current version is not installed.
Information about the versions that require updates should be included in your project planning
information.
Installing and Configuring the Avaya S8400 Server
Installing MPC firmware
35
January 2008