How To Use Avaya Installation Documents - Avaya S8400 Installing & Configuring

Hide thumbs Also See for S8400:
Table of Contents

Advertisement

Chapter 1: Introduction

How to use Avaya installation documents

Use this document as a guide to install and configure Avaya servers. For information about a
particular task, use the index or the table of contents to locate the page on which the information
is described. You also need information from other Avaya documents. This section lists those
documents and tells you when to use them.
To complete this installation:
In this document, see:
-
Pre-installation requirements
must complete at the site before you start the installation.
-
Equipment specifications
For how to install and connect the hardware, see Quick Start for Hardware Installation:
Avaya S8400 Server (03-300705).
Return to this document and see the remaining sections in the following sequence to
install the components of the server. If you are not to install certain components, skip the
procedures for those components.
-
Configuring the SNMP modules in the UPS
-
Server configuration
-
IP interface translations
See the appropriate sections in the following documents to install the port networks and
the media gateways:
- Installing the Avaya G650 Media Gateway (03-300144)
- Installation and Configuration for the Avaya G150 Media Gateway (03-300395)
- Quick Start for Hardware Installation: Avaya G250 Media Gateway (03-300433)
- Quick Start for Hardware Installation: Avaya G350 Media Gateway (03-300148)
- Quick Start for Hardware Installation: Avaya G450 Media Gateway (03-602053)
- Installing and Upgrading the Avaya G250 Media Gateway (03-300434)
- Installing and Upgrading the Avaya G350 Media Gateway (03-300394)
- Installing and Upgrading the Avaya G450 Media Gateway (03-602054)
- Quick Start for Hardware Installation: Avaya S8300 Server and Avaya G700 Media
Gateway (555-233-150)
- Installation and Upgrade for the Avaya G700 Media Gateway and Avaya S8300 Server
(555-234-100)
- Avaya IA 770 INTUITY AUDIX Messaging Application Administering the S8300 and
S8400 Servers to work with IA 770
Return to this document and see:
-
IP interface configuration
8
Installing and Configuring the Avaya S8400 Server
on page 9 first. This section describes the tasks that your
on page 10 for the technical specifications for the hardware.
on page 29
on page 41
on page 45 to program the IP interface.
on page 21
January 2008

Advertisement

Table of Contents
loading

Table of Contents