Avaya S8400 Installing & Configuring page 28

Chapter 3: Communication Manager installation
1. On your Services laptop computer, click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter to view the first screen.
Note:
To navigate on these screens, use the arrow keys to move to an option, and then
Note:
press the spacebar to select the option. Press Enter to submit the information on
the screen.
3. Select Install, ensure that <OK> is highlighted, and press Enter.
4. On the Select Release Version screen, ensure that the Build line and <OK> are
highlighted. Then press Enter.
5. On the Run AUDIX Installation screen, select Yes if you want to install IA 770 concurrently
with Communication Manager. Select No if you do not.
Note:
If you do not install IA 770 concurrently with Communication Manager at this time,
Note:
and decide later to install it, you will have to re-install Communication Manager.
6. Press Enter to partition the hard disk drive and format the partitions.
Once the drive is properly configured, the program starts the installation process and
reports the progress.
These processes can take up to 20 minutes to complete.
7. You must remove the CD-ROM from the drive at this time. When the server is ready to
reboot, the drawer of the CD-ROM drive opens.
The reboot can take up to 3 minutes. The Telnet session drops automatically when the
reboot starts.
28
Installing and Configuring the Avaya S8400 Server January 2008