Adding Media Gateways - Avaya S8400 Installing & Configuring

Chapter 5: IP interface translations

Adding media gateways

Note:
If system translations have been loaded on the server, media gateways do not
Note:
need to be added to administer the SIPI.
1. Type add cabinet n and press Enter, where n is the cabinet number, for each stack of
media gateways that is controlled by one TN8412AP SIPI circuit pack.
A cabinet is defined as a group of up to five G650 Media Gateways that are mounted in a
rack and TDM-connected.
2. Fill in the carrier location letter and the carrier type for each media gateway in the cabinet.
add cabinet 1
CABINET DESCRIPTION
Number of Portnetworks: 1
Survivable Remote EPN? n
CARRIER DESCRIPTION
Carrier
42
Installing and Configuring the Avaya S8400 Server
Cabinet: 1
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork
Location: 1
Cabinet Holdover: A-carrier-only
Room:
Carrier Type
E not-used
D not-used
C not-used
B G650-port
A G650-port
CABINET
IP Network Region:1
Floor:
Number
PN 09
PN 09
PN 09
PN 09
PN 09
Page 1 of 1
Building:
January 2008