Equipment Specifications - Avaya S8400 Installing & Configuring

Chapter 1: Introduction
Verify that the rail kit that is required to support the UPS is installed on the rack or available
to install. For how to install the rails, see the documentation that comes with the rail kit.
Verify that the equipment racks are grounded per local code. See Job Aid: Approved
Grounds (555-245-772).
Verify that the customer-provided AC power to the rack is from a nonswitched outlet.

Equipment specifications

The control network components of the S8400 Server consist of a G650 Media Gateway with a
TN8400AP circuit pack that is installed in slot 2, a TN8412AP (SIPI) that is installed in slot1, and
one UPS. The physical specifications for the S8400 control network are shown in
Table 1: S8400 control network components specifications
Component
G650 Media Gateway
UPS:
700 VA
1500 VA
Table 2 shows the specifications of the TN8400AP circuit pack.
Table 2: TN8400AP specifications
Feature
Microprocessor
Memory
Storage
Note:
Values of some parameters may change with future versions of the TN8400.
Note:
10
Installing and Configuring the Avaya S8400 Server
Dimensions
English
(height x width x depth
)
in inches
14 x 17.5 x 22
3.5 x 17 x 19
3.5 x 17 x 24
Specifications
Intel Celeron M (600 MHz)
512 MB RAM
IDE SSD, 2 GB
IDE hard drive
Dimensions
Metric
(height x width x depth
)
in centimeters
35.5 x 44 x 56
9 x 43 x 48
9 x 43 x 61
Table 1.
Height Weight
(u) (lb/kg)
8 39/18
2 34/15
2 50/23
January 2008