Backing Up Files To The Compact Flash Media; Before Leaving The Site - Avaya S8400 Installing & Configuring

Chapter 7: Postinstallation administration
3. Type almsnmpconf and press Enter and verify that the correct information is entered.
4. Type almenable -s y and press Enter.
5. Type almenable and press Enter and verify that alarm origination is enabled on the
SNMP module. If used, also verify that alarm origination by way of a modem is still
enabled.
6. Log off.

Backing up files to the compact flash media

Note:
Avaya requires the use of industrial grade compact flash media.
Note:
1. Insert the compact flash media into the compact flash slot on the server faceplate.
2. On the Maintenance Web Interface, under Data Backup/Restore, click Backup Now.
3. Select all applicable data sets.
4. To back up the data onto the compact flash media, select Local PC Card.
To format a new media card, also select Format PC Flash.
Note:
You must format the compact flash media before the first use only.
Note:
5. Click Start Backup. The system displays a message when the format is completed, which
takes approximately 10 seconds.
Note:
If you click Start Backup without media in the compact flash drive, you cause a
Note:
system error. In this case, repeat the steps beginning with Step 1.
6. To view the status of the backup, click Backup Status.

Before leaving the site

Provide the default LAN security settings to the customer.
Ensure that the customer knows that remote access to the server is available only if the
following services are enabled on the Maintenance Web Interface Firewall screen:
- SSH must be enabled
- https must be enabled to access the Maintenance Web Interface
- def-sat must be enabled to access the SAT commands
56
Installing and Configuring the Avaya S8400 Server January 2008