Configuration Of Navigation Map For Traffic System; Clearing Default User Settings - Garmin G1000 NXi Supplemental Maintenance Manual

b. Turn the FMS knob to highlight the database to transfer to the Active column.
c. Press the ENT key on the MFD and a cyan double arrow will appear between the
Standby and Active columns.
d. Restart the displays.
e. Go to the MFD Aux - Databases page and confirm the databases transferred.

3.13 Configuration of Navigation Map for Traffic System

With the MFD in normal mode, use the FMS knob to select the Navigation Map page
then press the Map Opt softkey, the press the Traffic Softkey and ensure that the bar
under the Traffic softkey turns green.
Press the MENU button on the MFD, then select "Map Settings" with the FMS knob, then
press ENT.
Verify the flashing cursor highlights the GROUP field.
Turn the small FMS knob to select Traffic and press ENT on the MFD.
If not already selected, use the MFD FMS knob to make the following selections:
•
Traffic – On
•
Traffic Mode – All Traffic
•
Traffic Symbols – 250NM
•
Traffic Labels – On 250NM
Return to the Map Page by pressing the FMS knob.

3.14 Clearing Default User Settings

Open MFD, PFD (ESS BUS), and PFD (AVN BUS 1) circuit breakers.
While holding the CLR button on the PFD, close the PFD (ESS BUS) circuit breaker.
When prompted to clear user settings, select the YES softkey.
When user settings have been cleared appears on the screen, Open the PFD (ESS
BUS) circuit breaker.
Wait ten seconds, then while holding the CLR button on the MFD, close the MFD circuit
breaker.
When prompted to clear user settings, select the YES softkey.
When user settings have been cleared appears on the screen, open MFD circuit
breaker.
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04
Page 3-38
Revision 3