Table of Contents
Advertisement
GB4550.book Page 81 Wednesday, June 14, 2000 9:21 PM
off. See Connecting to a PBX in the Installation chapter for instructions
on changing this setting.
FLASH/EARTH/NORMAL: If your fax machine is connected to a
PBX, this function tells your fax machine about the type of PBX line your
fax machine is connected to. Available settings are normal (N), flash (F)
and earth (E).
AUTO START: When this function is turned on, your fax machine
automatically begins dialling as soon as you have selected a location by
pressing a One Touch key or entering an Auto Dial code. You do not have
to press the Start key. Available settings are on and off.
DIAL PREFIX: If your fax machine is connected to a PBX, use this
function to tell your fax machine what access number is used to obtain an
outside line from your PBX. You can enter up to 4 digits. See Connecting
to a PBX in Installation for instructions on changing this setting.
Changing dial parameter settings
1.
Press the Select Function key.
2.
Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3.
Using the numeric keypad, press number 2. The display shows
2:DIAL PARAMETER.
Press the ! YES key until the display shows the dial parameter you
4.
want to change.
Repeatedly press the NO " key until the setting you want appears
5.
in the display.
Press the ! YES key to confirm your selection. The name of the
6.
next dial parameter setting will appear in the display.
7.
Press the Select Function key to finish.
Chapter 6 - Programming
English
81
Advertisement
Table of Contents
