Table of Contents
Advertisement
GB4550.book Page 29 Wednesday, June 14, 2000 9:21 PM
Chapter 3 - Dial Directories
Programming One Touch keys
Your fax machine has ten One Touch keys for rapid dialling. You can
store up to two fax numbers with 32 digits for each One Touch key, a main
number and an alternate number. The alternate number is used if the main
number is busy or does not answer. You can also enter a 15-character
Location ID (name) for each One Touch key.
Note 1: To find One Touch keys which are not yet programmed, you may
repeatedly press the Search key during step 2.
Note 2: If all your One Touch keys are programmed, searching
automatically looks for the first unassigned Auto Dial number.
1.
Press the Select Function key, then press the 8/Location Program
One Touch key. The display shows LOCATION PROGRAMMING
ENTER (SRCH, OT, A/D, #)
2.
Press a One Touch key to program and the display briefly shows
NO=<FAX NO.>, ID=<LOCATION ID> or a previously
programmed fax number and location ID.
3.
After the display clears, enter the main fax number as follows:
To do this
Enter numbers
Enter spaces
Enter hyphens
Enter pauses
Switch from pulse to tone dialling for
part of the call
Move the cursor to make corrections
4.
Press the Start key.
Chapter 3 - Dial Directories
Use
Numeric keypad (press once).
Space One Touch key
Hyphen key
Pause key (i.e. to wait for long distance or outside
lines)
*/Tone key
!
"
Press
YES or
NO keys.
English
29
Advertisement
Table of Contents
