Table of Contents
Advertisement
GB4550.book Page 93 Wednesday, June 14, 2000 9:21 PM
continue to use the toner cartridge without replacing it until the print
density becomes too low. If the print density becomes low even before
your fax machine displays REPLACE TONER CART., gently wipe the
lens surface of the LED array (see Step 6). If the print density does not
improve, replace the toner cartridge. When your fax machine's display
shows CHANGE DRUM, replace the image drum unit.
BE CAREFUL WHEN HANDLING THE TONER CARTRIDGE. DO
NOT LET TONER SPILL ON YOUR CLOTHING OR OTHER POROUS
MATERIALS. SEE SAFETY AT THE BEGINNING OF THIS USER'S
IF YOU OPEN THE TOP COVER, YOU WILL SEE A LABEL THAT
READS: (CAUTION-HOT). THIS AREA IS EXTREMELY HOT AND
MUST NOT BE TOUCHED UNDER ANY CIRCUMSTANCES.
1.
Lift the top cover into an upright position.
2.
Grasp the control panel. Pull upward and toward you until it
releases. Swing the control panel out of the way.
3.
Pull the coloured lever on the old toner cartridge all the way toward
you. Carefully pull the old toner cartridge out of the image drum
Chapter 8 - Problem Solving
WARNING
GUIDE.
WARNING
English
93
Advertisement
Table of Contents
