Changing Dial Parameter Settings - Oki OKIOFFICE 87 User Manual

off. See Connecting to a PBX in the Installation chapter for instructions
on changing this setting.
FLASH/EARTH/NORMAL: If your fax machine is connected to a
PBX, this function tells your fax machine about the type of PBX line your
fax machine is connected to. Available settings are normal (N), flash (F)
and earth (E).
AUTO START: When this function is turned on, your fax machine
automatically begins dialling as soon as you have selected a location by
pressing a One Touch key or entering an Auto Dial code. You do not have
to press the Start key. Available settings are on and off.
DIAL PREFIX: If your fax machine is connected to a PBX, use this
function to tell your fax machine what access number is used to obtain an
outside line from your PBX. You can enter up to 4 digits. See Connecting
to a PBX in Installation for instructions on changing this setting.

Changing dial parameter settings

1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Using the numeric keypad, press number 2. The display shows
2:DIAL PARAMETER.
4. Press the
want to change.
5. Repeatedly press the NO
in the display.
6. Press the
next dial parameter setting will appear in the display.
7. Press the Select Function key to finish.
Chapter 6 - Programming
YES key until the display shows the dial parameter you
key until the setting you want appears
YES key to confirm your selection. The name of the
English
81