Table of Contents
Advertisement
GB4550.book Page 13 Wednesday, June 14, 2000 9:21 PM
Getting started
To install your new fax machine, follow the instructions from Unpacking
to Setting the Fax Identification. You must complete these steps for your
fax machine to operate properly.
If you have purchased an option package for your fax machine, refer to the
documentation you received with that option.
Where to install your fax machine
1.
Install your fax machine in a dust-free location away from direct
sunlight.
2.
Allow several centimetres on each side of the fax machine to ensure
adequate ventilation.
3.
Make sure that both power and telephone outlets are available
nearby.
4.
Choose a location where the relative humidity is between 20% and
80%, and where the temperature is between 10 °C and 32 °C.
Unpacking
Before you begin, make sure that all items listed below are included in
your package. Refer to the illustrations in Component Identification and
remove the contents from the carton placing them on a sturdy surface.
1.
Fax machine unit
2.
Toner cartridge
3.
Image drum unit (inside facsimile unit)
4.
Power cable
5.
Telephone line cable
6.
Paper tray/Copy stacker
7.
Document tray
Chapter 2 - Installation
Chapter 2 - Installation
English
13
Advertisement
Table of Contents
