Changing Dial Parameter Settings - Oki 56801 User Manual

dialing (the tone duration varies in different countries). Avail-
able settings are 75 ms, 85 ms, and 100 ms.
PBX LINE : Turn this function on if your fax machine is con-
nected to a PBX. Once this function has been turned on and the
dial prefix function has been programmed, your fax machine
will recognize the dial prefix number you use in your PBX to
get an outside line. After it dials your dial prefix number, your
fax machine pauses to wait for an outside line before dialing the
rest of the telephone number. Available settings are On and Off.
See "Connecting to a PBX" on page 28 in Installation for
instructions on changing this setting.
AUTO START : When enabled, your fax machine will automat-
ically begin dialing as soon as you have selected a location by
pressing a One-Touch key or entering an Auto Dial code. You
do not have to press the key. Available settings are On and
Start
Off.
: If your fax machine is connected to a PBX, use
DIAL PREFIX
this function to tell your fax machine what access number is
used to obtain an outside line from your PBX. You can enter up
to 4 digits. See "Connecting to a PBX" on page 28 in Installa-
tion for instructions on changing this setting.

Changing Dial Parameter Settings

SELECT
9/OP
FUNCTION
USER
PROG.
1. Press the
Select Function
2. Press the 9/User Prog.
1:FUNC. PROGRAMMING
3. On the numeric keypad, press
.
PARAMETER
4. Press the YES key until the display shows the dial parameter
you want to change.
5. Repeatedly press the NO
appears in the display.
6. Press the key to confirm your selection. The name of
YES
the next dial parameter setting will appear in the display.
7. Press the Select Function
59
1: FUNC.PROGRAMMING
key.
One-Touch key. The display shows:
.
. The display shows
2
2:DIAL
key until the setting you want
key to finish.