Table of Contents
Advertisement
GB4550.book Page 32 Wednesday, June 14, 2000 9:21 PM
English
3.
Using the numeric keypad, enter a 2-digit number (01-70) for the
Auto Dial number you want to program.
4.
The display briefly shows NO=<FAX NO.>, ID=<LOCATION ID>
or a previously programmed fax number and location ID.
5.
Enter the fax number. Refer to the instructions below.
To do this
Enter numbers
Enter spaces
Enter hyphens
Enter pauses
Switch from pulse to tone dialling for
part of the call
Move the cursor to make corrections
6.
Press the START key.
7.
Enter the Location ID. This is a descriptive title up to 15 characters
long. Refer to the instructions below.
To do this
Enter numbers
Enter spaces
Enter hyphens
Enter alphabetic characters
Enter a unique character
Enter two characters using
the same key
Move the cursor to make
corrections
The display shows G3 COMMUN. SPEED [33.6]. Press NO " key
8.
to adjust the speed and ! YES key to select it.
Note:
If you are experiencing problems communicating with a remote
location, try lowering the FAX SPEED or turning on ECHO
PROTECTION.
32
Numeric keypad (press once).
Space One Touch key
Hyphen key
Pause key (i.e. to wait for long distance or outside
lines)
*/Tone key
!
"
Press
YES or
NO keys.
Use
Numeric keypad (press once).
Space One Touch key
Hyphen key
Locate the character you want on the numeric keypad. Press
that key repeatedly until the character appears.
Press the 0/Unique key repeatedly until the character you
want appears. The following characters are available: ! # & ' (
) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø
"
Press the NO
key to move to the next character.
!
"
Press
YES or
NO keys.
Use
Advertisement
Table of Contents
