Display Message Examples - Oki OKIFAX 4550 User Manual

GB4550.book Page 112 Wednesday, June 14, 2000 9:21 PM
English
Direct Dialing In Service: In this service available in point-to-multipoint
transmissions, numbers can be assigned to terminals in addition to their
subscriber numbers. This service makes it possible to terminate calls at
specified terminals.
Multiple Subscriber Number (MSN) Restriction: This function is used
in combination with direct inward dialing to check if the number of the
incoming call matches an MSN in the machine's database. If not, the call
is rejected.
Sub-Address Service: Sub-addresses are most commonly used when
faxing point-to-multipoint (P-MP). In addition to the telephone number of
the remote location, the user must also know and input the sub-addresses
of the terminals that the fax is directed to.

Display message examples

During calling sequence:
0334567890
CALLING
During fax transmission:
ACME CO
SENDING G4/64.0K
Starting automatic reception:
AUTO REC. START
During receiving:
ACME CO
RECEIVING G4/64.0K
For more detailed information and instructions on how to set/use a
machine when the ISDN G4 Board is installed, please refer to the hand-
book provided with the ISDN G4 Board.
112