Table of Contents
Advertisement
GB4550.book Page 42 Wednesday, June 14, 2000 9:21 PM
English
Rejecting unsolicited fax messages
The closed network option allows you to limit the locations your fax
machine can communicate with. Using this function, you can set your fax
machine to refuse to receive any faxes from locations whose telephone
numbers are not programmed into your One Touch keys or Auto Dial
numbers. Use of this function allows you to reject any unsolicited faxes
such as advertising.
Note:
In some countries, this function cannot be set by the user. Please
contact your supplier for assistance.
You can also set your fax machine not to send faxes to locations whose
telephone numbers are not programmed into your One Touch keys or
Auto Dial numbers.
The available settings are limit reception only (RX), limit both
transmission and reception (T/R), and no limitation on transmission or
reception (OFF). To use the closed network function, follow the
instructions below.
1.
Press the Select Function key.
2.
Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
Press the ! YES key. The display shows FUNCTION NO.[
3.
4.
Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK and the current setting of this function.
Press the NO " key until the setting you want appears in the
5.
display.
Press the ! YES key to confirm the new setting.
6.
7.
Press the Select Function key to finish.
Power failures and memory
If power is interrupted to your fax machine, the following problems occur:
•
Any messages your fax machine has scanned into memory, but not
yet transmitted, are lost.
•
Any messages your fax machine has received into memory, but not
yet printed, are lost.
42
]
Advertisement
Table of Contents
