Term Definitions; Other Settings; Isdn Dial Mode (User Setting 30) - Oki OKIFAX 4550 User Manual

GBA02.fm Page 110 Monday, June 19, 2000 2:27 PM
English
6. Enter the ISDN(G4) ID and press the Start key.
7. Enter the ISDN SUB NUMBER and press the Start key.
8. Enter the ISDN CALLED NO. and press the Start key.

Term definitions

COUNTRY CODE: This number is a terminal identifier (TID). Up to
three numbers (the country code of the country in which the machine is
being operated) can be registered.
ISDN(G4) NUMBER.: This is the national subscriber number for the
ISDN. Up to 20 numbers can be used. This number is used as a TID and
for caller number information (CLIP) and checking MSN.
ISDN(G4) ID: This number is a terminal identifier. Up to ten alphabetic
characters can be used.
ISDN SUB NUMBER.: This is the sub-addressing number for directing
communications. Up to 19 numbers can be used.
ISDN CALLED NO.: This is the called number for the ISDN-PBX. Up
to 20 numbers can be used. This number is used for caller number infor-
mation and checking MSN.
The COUNTRY CODE, ISDN(G4) NUMBER must be registered in the
fax machine. If these items are not registered in the fax machine, ISDN
service may be denied.

Other settings

ISDN dial mode (user setting 30)

Set to G3 - The call originates in the G3 mode when dialling is carried
out from the keypad. At the time, speech analogue transmission is
requested to the network.
Set to G4 (default setting)- The call originates in G4 mode when dialling
is carried out from the keypad. Non-restricted digital transmission is
requested to the network.
110