Table of Contents
Advertisement
GB4550.book Page 34 Wednesday, June 14, 2000 9:21 PM
English
To do this
Delete a One Touch location
Delete an Auto Dial location
Search for a location by
name to add or delete
5.
After you have completed your selection (by pressing START key),
the display again shows SELECT LOC.(S) YES (STR/LOC.) EXIT
("). Continue to add or delete locations from your group. Each
group can contain up to a maximum of all of the One Touch and
Auto Dial locations available on your fax machine.
When you are finished programming your group, press the NO "
6.
key. The display shows LOCATION PROGRAMMING ENTER
(SRCH, OT, A/D, #).
7.
To program another group, go back to Step 2. If you are finished,
press the Select Function key.
Note:
After programming a group, you can check the locations
programmed into the group by carrying out Steps 1 - 3. At Step
4, repeatedly press the Start key to view all the programmed
locations. To delete a location, press the NO " key.
Note:
The locations programmed into groups can be printed. See
Telephone Directory in Reports later in this user's guide.
34
Use
Press the One Touch key. Press Start to delete it from the
group.
Press Auto Dial. Enter a 2 digit Auto Dial number. Press Start
to delete it from the group.
Press the Search key repeatedly until the location you want
appears.Press START to add it to the group. Press START to
delete it from the group.
Advertisement
Table of Contents
