Changing Your Dial Parameter Settings - Oki Okifax 4580 User Manual

MF(TONE) DURATION: If your machine is set
to tone dialing, this function controls the duration
of the tones used for dialing (the tone duration
varies in different countries). Available settings
are 75 ms, 85 ms, and 100 ms.
PBX LINE: Turn this function on if your machine
is connected to a PBX. Once this function has
been turned on and the access digit function
has been programmed, your machine recog-
nizes the access digit you use in your PBX to
get an outside line. After it dials your access
digit, your machine pauses to wait for an outside
line before dialing the rest of the telephone
number. Available settings are on and off. See
Connecting to a PBX in the Installation section
for instructions on changing this setting.
FLASH/EARTH/NORMAL: If your machine is
connected to a PBX, this function tells your
machine about the type of PBX line your ma-
chine is connected to. Available settings are
normal (N) and flash (F).
AUTO START: When this function is turned on,
your machine automatically begins dialing as
soon as you have selected a location by press-
ing a One-Touch key or entering an Auto Dial
code. You do not have to press START. Avail-
able settings are on and off.
DIAL PREFIX: If your machine is connected to a
PBX, use this function to tell your machine what
access number is used to obtain an outside line
from your PBX. You can enter up to 4 digits. See
Connecting to a PBX in the Installation section
for instructions on changing this setting.

Changing Your Dial Parameter Settings

Fig09_01a.eps
1 Press the SELECT FUNCTION key.
2 Press the 9/USER PROG. One-Touch key.
3 On the numeric keypad, press 2. The display
shows 2:DIAL PARAMETER.
4 Press
until the display shows the dial
YES
parameter you want to change.
5 Repeatedly press
NO
want appears in the display.
6 Press
to confirm your selection. The
YES
name of the next dial parameter setting ap-
pears in the display.
7 Press the SELECT FUNCTION key to finish.
until the setting you