Using Voice Request; Initiating Voice Request - Oki OKIFAX 4550 User Manual

Table of Contents

Advertisement

GB4550.book Page 44 Wednesday, June 14, 2000 9:21 PM
English
2.
Insert a sheet of paper, printing side up, into the manual paper
feeder slot until you feel the fax machine grab hold of the paper.
3.
Press the Copy key.
Note:
It is recommended to make single copies only when using the
manual paper feed slot. This will prevent any possible paper feed
jams from occurring.

Using voice request

The voice request feature allows you to have a conversation with a person
at a remote fax machine during a fax communication. Either the sender or
receiver of the fax can initiate a voice request.
If you are sending a fax, you can answer a voice request only after all
pages have been transmitted. If you are receiving a fax, you can answer a
voice request after reception of each page.
You will know if the person on the other fax machine has issued a voice
request when you hear a warbling tone. If you do not respond in
approximately six seconds, the voice request is automatically cancelled.
Note 1: You will need to have either an attached handset or an external
telephone to use the voice request function.
Note 2: The voice request feature is not available if fax communication
takes place at speeds higher than 14,400 bps.

Initiating voice request

1.
When the display shows SENDING or RECEIVING, press the
Hook/V. Request key.
44

Advertisement

Table of Contents
loading

Table of Contents