Table of Contents
Advertisement
GB4550.book Page 25 Wednesday, June 14, 2000 9:21 PM
another fax machine and no one is there to answer, your fax machine will
automatically send a cover letter with a call back message. The call back
message is printed on a separate sheet with the message "Please call back"
and a telephone number where you can be reached. The call back number
entered here is the number that appears on the call back message.
Setting fax machine identification
1.
Press the Select Function key.
2.
Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3.
On the numeric keypad, press 4. The display shows 4:SYSTEM
DATA PRG.
Press the ! YES key. The display shows NO=<TSI/CSI>,
4.
ID=<SENDER ID>.
5.
After the display clears, enter the full telephone number of your fax
machine using the numeric keypad up to twenty characters.
Note:
Use the Hyphen or 8/+ One Touch key to enter a "+" character
before the number, which is a generally recognised method of
indicating the international access code before the country
dialling code. The 9/Space One Touch key is used to enter spaces
in a number.
6.
Press the START key to save your entry.
7.
Enter your Sender ID. This is a descriptive title up to 32 characters
long. Refer to the instructions below.
To do this
Enter numbers
Enter spaces
Enter hyphens
Enter alphabetic
characters
Enter a unique
character
Move the cursor to
make corrections
Chapter 2 - Installation
Numeric keypad. Press once for each number required.
Space One Touch key
Hyphen key
Locate the character you want on the numeric keypad. Press that key
repeatedly until the character appears.
Press the 0/Unique key repeatedly until the character you want appears.
The following characters are available: ! # & ' ( ) * + , - . / : ; = ? · ä ß ñ ö
ü Æ Å Ø æ å ø
!
"
Press
YES or
NO keys.
Use
English
25
Advertisement
Table of Contents
