Method For Making The Cable For Connection To The Host - Omron NT20S Operation Manual

Method for Making the Cable for Connection to the Host

Method for Making the Cable for Connection to the Host
Explained below is the method for making the cable that connects the NT20S-ST121-EV3/ST128 with the PC.
Connect the wires to the connectors in accordance with the connector specification for each unit.
Parts Required
Two connectors, two connector covers and one cable are required to make up a connecting cable. One connector
and one connector cover is supplied with most PCs.
The parts supplied with each unit are indicated in the table below.
Name
XM2A-0901
Connector
XM2A-2501
DB-25P
XM2S-0911
Connector cover
XM2S-2511
DB-C2-J9
When connecting the NT20S to a CjjH PC manufactured by OMRON, the connector and connector hood must
be prepared separately since they are not supplied with the CjjH.
The connector provided in the CPU unit of the CjjH is a 9-pin connector. For the connection, the following con-
nector and connector hood should be prepared.
S Connector
S Connector cover : XM2S-0911 (9-pin, OMRON)
Use the cable recommended by OMRON.
The recommended cables are indicated in the table below.
Name
Cable Cable
256
APPENDIX G
Model
C series CQM1
CVM1/CV series CPU unit
CV500-LK201
C500-LK203
C500-LK201
C200H-LK201
C500-LK201-V1
C120-LK201-V1
C series CQM1
CVM1/CV series CPU unit
CV500-LK201
C500-LK203
C500-LK201
C200H-LK201
C500-LK201-V1
C120-LK201-V1
: XM2A-0901 (9-pin, OMRON)
Model
AWG28 5P
IFVV-SB
CO-MA-VV-SB
5P 28AWG
Delivered with
Multiconductor shielded cable (FUJIKURA, Ltd.)
Multiconductor shielded cable (HITACHI Cable, Ltd.)
Appendix G
Remarks
9-pin, manufactured by OMRON
25-pin, manufactured by OMRON
25-pin, manufactured by JAE
9-pin, manufactured by OMRON
25-pin, made by OMRON
25-pin, made by JAE
Remark