Hapter; Altigen Ip Phone Configuration; Configuring The Altigen Ip Phone - Altigen ACM 6.5 Administration Manual

AltiGen IP Phone Configuration

AltiGen manufactures a series of IP phones. The system administrator can control and
program the following areas for each type of AltiGen IP phone:
Specify the server IP address that the IP phone needs to register
•
Protect the IP phone configuration with a password
•
Prevent the user from changing the configuration from the IP phone
•
Configure the Trunk Access (Route Access) code
•
Configure the time zone and time format
•
Specify the TFTP server for firmware updates
•
Force the IP phone to reset and download new firmware
•
Set SIP transport settings for SIP security
•
Enable SIP telephony service for a selected third-party SIP device
•
Configure programmable keys
•
Allow the IP phone to receive workgroup real time status
•
Allow the phone to auto-discover the server's IP address
•

Configuring the AltiGen IP Phone

To configure the AltiGen IP phone, select PBX > AltiGen IP Phone Configuration.
This opens the AltiGen IP Phone Configuration window, where, after setting up an IP
extension, you can set parameters for the extension:
MAXCS ACM 6.5 Administration Manual 233
C
H A P T E R
17