Setting Parameters - Altigen ACM 6.5 Administration Manual

Add and delete a gateway
•
Attach and detach a gateway
•
Change a gateway name, IP address, password, country
•
Enable Media Server on the Softswitch
•
Set TDM Bus mode for a gateway
•
Set CT-Bus clock for a gateway
•
To open the Softswitch Component Configuration window, select
System > Softswitch Component Management.
Figure 4. Softswitch Component Configuration window, Media Server/Gateway tab

Setting Parameters

To read or set parameters for a specific gateway, first select the gateway in the list on
the left. After making changes to a gateway, click Apply before selecting another
gateway. When you are finished with the window, click OK.
Parameter
ID/Name/Type
Status
Description
Lists all gateways that have been added using
the Add button in this window.
Shows the status of the selected gateway:
active, disconnected, initializing, resetting,
failed. (Read-only field.)
MAXCS ACM 6.5 Administration Manual 77
Setting Parameters